Brand Directory 07 · Multi-Brand

Multi-Brand & Universal Blades and Tooling

Blade geometry is the layer that converged worldwide: Ø6 mm shanks and 0.63 / 1.0 / 1.5 mm stock are shared across brands and regions, while heads and seats stayed proprietary. Aftermarket heads converge on a 40 mm mounting hole, which makes this line the practical cross-brand fallback — with every fit still confirmed per machine before dispatch.

Confirmed per order from your nameplate

Interface & blade notes

Tool interfaceAftermarket tool heads converge on a 40 mm mounting hole — the cross-brand consensus (two independent suppliers agree; supplier-stated, not lab-tested). Per-machine check: exact hole pattern confirmed from photos before every head order.
Blade shankØ6 mm h7 Weldon shank widely adopted across OEM and aftermarket blades (per supplier catalogs on both sides).
Air supplyCompatible pneumatic heads commonly spec 0.6–0.8 MPa with 10 mm OD air tube and 5–8 mm stroke (supplier-stated). Air-tube OD differs between brands (8 mm vs 10 mm observed) — confirm the fitting per machine.
Blade layerOscillating, drag and kiss-cut layers; stock 0.63 / 1.0 / 1.5 mm, blade width 6–7 mm.
Verification discipline. Compatibility is confirmed per order from the nameplate and photos — never promised as verified.

Tool lines · Multi-Brand / Generic

Tool / Blade lineVerification level
Ø6 mm shank oscillating blade — 0.63 / 1.0 / 1.5 mm stock reference
Drag blade — 6–7 mm width class reference
Kiss-cut / engraving blade — 45° / 60° reference
40 mm mount pneumatic oscillating head (POT class) — fit confirmed per machine per-machine check

Send the nameplate — we verify before quoting

Compatibility is confirmed per order from the nameplate and photos — never promised as verified. Send the machine nameplate and your current tool / blade photos with the inquiry.

Request a Verified Quote Open Find My Blade Compatibility Reference
Find Blade Contact Bulk Inquiry