Compatibility — Brand & Interface Reference

Machine Brand	Tool Interface Layer	Blade Layer	Verification Status
Zund	Proprietary tool holders — verify tool head model & holder	Z10-class oscillating, drag, kiss-cut	Pending photo check
Esko Kongsberg	K-series tool heads — verify series & air specs	K29 / K1 / K6t / K73 class	Pending photo check
IECHO / JWEI	TK-series tools — verify holder interface	Oscillating / vibration class	Pending photo check
Gerber / MCT	Legacy interfaces — per-machine check	Oscillating class	Pending photo check
Summa / MultiCam / Colex / AXYZ	Per-machine check	Oscillating / drag class	Pending photo check
Generic / CN platforms	Common shank interfaces — verify by photo	Wide coverage	Per order

"Verified" status is granted per real order + supply-chain record. This demo marks everything pending — before launch, replace with your actual verification log.

Self-Check

Is your machine tool-ready?

Knife-ready tool station available in the tool head carousel
Station bore matches the tool shank (commonly Ø40 mm class — verify by photo)
Stable air supply: pressure & consumption meet the tool spec
Controller supports oscillating-tool signal & parameters

These are check directions, not a compatibility promise. Everything is confirmed against nameplate + photos.

▣ Photo Placeholder Replace before launch: tool station + shank comparison photo

High-Frequency Pneumatic Knife — Compatibility

Our high-frequency pneumatic knife (Ø40mm body, 0.18 m³/min) is compatible with mainstream domestic oscillating cutting machines, including JWEI, iEcho, RZCUT and similar brands. If your machine has a Ø40mm-class tool station and stable air supply, it will fit.

Not sure? Send your machine make/model and a tool holder photo — we confirm before you order. View the knife →

Your machine not listed?

Send the nameplate photo via RFQ — we verify manually and quote back. Same rule as always: verify first, then buy.

Send Nameplate Photo